How to Layout Scaffold on Fox Blocks' Insulated Concrete Form Walls
When you’re building with insulated concrete forms, chances are you’re going to need to set up scaffolding.
From Efficiency to Durability: The Many Benefits of ICF Construction
Get Your Home Ready for Winter in These 6 Simple Steps
Each year seems to go by quicker than the last. Be prepared when old man winter knocks at your door. Get your home winter ready in these easy steps.
Project Estimator
Thanks for Downloading
Products
Can the plastic webs be detected by using stud finders?
A stud finder typically uses the density of materials to locate studs. The polypropylene (plastic) web material will show up on high quality density stud finders. Note, the webs in Fox Blocks are spaced at 8″ (200 mm) on center and will be continuous vertically on each side of the wall.
Are there different types of Expanded Polystyrene (EPS)?
EPS is listed basically under four property classifications – Type I, II, III and IV. The characteristics are based on the density of the molded foam which defines the product type. Fox Blocks ICFs are manufactured as a Type II EPS with a density of approximately 1.5 pounds per cubic foot.
Glen's Contractor Tip Corner: Short Jogs
I had a call this week from a contractor who wanted to know if there was an easy way to build a two foot jog into a wall. This brought back flashbacks of when I used to attempt to interlock corners thinking the strength of the interlock was going to hold things together during concrete placement.
When is a Taper Top form required?
Taper Top forms are specifically designed to provide a larger bearing surface along the top of the wall. Typically, the increased bearing surface may be used to support masonry, floor or roof loads. Taper top forms are used in the transition from ICF to wood frame construction and the taper top form would be the top form on the wall.