Are there different types of Expanded Polystyrene (EPS)?
EPS is listed basically under four property classifications – Type I, II, III and IV. The characteristics are based on the density of the molded foam which defines the product type. Fox Blocks ICFs are manufactured as a Type II EPS with a density of approximately 1.5 pounds per cubic foot.
Glen's Contractor Tip Corner: Short Jogs
I had a call this week from a contractor who wanted to know if there was an easy way to build a two foot jog into a wall. This brought back flashbacks of when I used to attempt to interlock corners thinking the strength of the interlock was going to hold things together during concrete placement.
When is a Taper Top form required?
Taper Top forms are specifically designed to provide a larger bearing surface along the top of the wall. Typically, the increased bearing surface may be used to support masonry, floor or roof loads. Taper top forms are used in the transition from ICF to wood frame construction and the taper top form would be the top form on the wall.
How does the ICF block get secured to the foundation?
The ICF blocks are held in place with either low expansion spray foam or a metal starter track. The bracing/alignment system, typically installed after the 4th course of block, also supports the ICFs in place. Once the concrete is in the wall there is no concern with the forms moving. The concrete is connected to the footing with reinforcing dowels.
THE CONDOR INFINITY-EDGE POOL
High-Tech Infinity Pool Creates Resort Style Oasis. The Condor’s ICF infinity-edge pool highlights EcoFinish, 90-foot integrated clear acrylic wall, 20-foot multi-fold glass doors and colored LED light effects, which contribute to the show-stopping residential courtyard.