Is installing ICFs a DIY project?
Fox Blocks recommends that all installers using Fox Blocks ICFs complete a Fox Blocks training program to ensure they have a better understanding of the basics. However, for first time installers, it is preferred that a Fox Blocks trained, experienced installer inspect the installation prior to placement of concrete and assist in the placement of the concrete, as they are familiar with working with concrete and can ensure the build is structurally sound and safe and the walls are consolidated properly, built straight and plumb.
How are Fox Blocks green/environmentally friendly?
Fox Blocks contain a minimum of 40% recycled content by weight.
- Fox Blocks do not off-gas and are not manufactured using any gases that deplete the ozone or are harmful to the environment.
- Fox Blocks require low embodied energy to manufacture.
- Fox Blocks do not contain any materials, that promote mold or mildew growth.
- Fox Blocks are an efficient construction method thereby reducing the amount of construction waste, dust and air pollution in the building process.
- Building with Fox Blocks will save on heating and cooling costs because less air is exchanged between the outside and inside of your home. This also means a smaller more efficient HVAC unit is required for the home.
- Fox Blocks are sustainable. They will not rot or deteriorate for the life of your home.
- Fox Blocks provide a secure, durable, comfortable, long lasting building
Can masonry be installed on the exterior walls?
Yes, Fox Blocks has a brick ledge form and the xLerator ledge reinforcement that is designed to support masonry. Fox blocks also has a tieKey accessory which is a specifically made as a masonry tie, to be inserted through the form into the concrete.
Is there a top and bottom on the blocks when installing the Fox Blocks forms?
Fox Blocks forms have a reversible interlock system on all blocks. The robust interlock allows the blocks to fit together very tightly, eliminating any requirement for adhesives. A reversible interlock speeds up the installation.
Can I install a 16' garage door and / or large openings in a concrete wall?
Yes, if the following criteria is available for the design of a concrete lintel (beam) over the opening – concrete lintel depth minimum 16″ (400 mm) or more with no point loads. Larger openings would require an engineered design.
What size and how much steel reinforcement is required in an ICF?
Fox Blocks walls are designed as reinforced concrete walls, with steel reinforcement bars specified to be installed vertically and horizontally, as the walls are built. Typical reinforcement bar sizes used are #4 or #5 (10 m or 15 m).
What if my contractor doesn’t know how to build with it?
Fox Blocks offers the most comprehensive installer training in the industry. We can train your contractor or help you locate a trained installer in your area.
How do I protect the ICFs below grade?
All ICF walls below grade, that have habitable space on one side (basement), must have a waterproofing / dampproofing membrane installed. For walls that do not have habitable space on one side (crawl space, frost walls, etc.) the EPS can be left exposed to the earth. The EPS will not deteriorate when exposed to the earth.
Where can I purchase the product?
Fox Blocks has a wide-ranging network of knowledgeable product distributors and trained installers across North America; contact Fox Blocks Customer Service to find the closest Fox Blocks product distributor or trained installer in your area.
When can I backfill the foundation wall?
The concrete must cure for a minimum of 7 days and the foundation wall must be laterally supported, meaning the floor system is installed supporting the top of the wall. All below grade waterproofing / dampproofing must be installed.