Where can I purchase the product?
Fox Blocks has a wide-ranging network of knowledgeable product distributors and trained installers across North America; contact Fox Blocks Customer Service to find the closest Fox Blocks product distributor or trained installer in your area.
When is a Taper Top form required?
Taper Top forms are specifically designed to provide a larger bearing surface along the top of the wall. Typically, the increased bearing surface may be used to support masonry, floor or roof loads. Taper top forms are used in the transition from ICF to wood frame construction and the taper top form would be the top form on the wall.
What size and how much steel reinforcement is required in an ICF?
Fox Blocks walls are designed as reinforced concrete walls, with steel reinforcement bars specified to be installed vertically and horizontally, as the walls are built. Typical reinforcement bar sizes used are #4 or #5 (10 m or 15 m).
Does the Fox Blocks contain recycled materials?
The plastic webs in Fox Blocks forms are 100% recycled postindustrial polypropylene. The EPS insulation is virgin material. Recycled content for an ICF block is measured by weight. The recycled content by weight of a standard 6″ Fox Blocks form — 48%.
Do you need special code approvals to build with Fox Blocks ICFs?
No, ICFs in general are covered in the building code and Fox Blocks ICF has a product evaluation report that confirms the product and applications meet the requirements of the respective building codes in the USA and Canada. These reports are available on our website.
Does EPS absorb water?
No, EPS is a closed cell foam and does not act like a sponge or absorb water.
Do I have to finish my basement walls with drywall?
All building codes in the USA and Canada specify that plastic insulation (EPS) must be covered by a thermal barrier equivalent to 15 minutes of fire protection in habitable spaces. If the basement is classified as habitable space, then gypsum board must be applied but does have to taped and filled. Check with your local building official.
What do termites do to the foam?
EPS provides no nutrient value and is not a food source for termites. If left exposed, termites may tunnel into the foam in search of fibrous food. When building, in a heavy termite infestation area, care is required in the detailing and construction of the walls that will be in contact with ground, to prevent access to the foam for termites.
Is an ICF home quieter than a stick framed home?
Absolutely. The exterior walls are two layers of continuous insulation, the density of solid concrete and a layer of ½” gypsum board on the inside all contribute to superior sound suppression of STC 50 for the whole building envelope. Note: A wood frame system of equivalent STC rating would be 2 x 4 studs spaced 16˝ o/c, with 3½˝ absorptive material, 1 layer of 5 /8˝ Type X gypsum board on resilient channels spaced 16˝ o/c, and 2 layers of 5 /8˝ Type X gypsum board on the other side. (Courtesy of 1995 NBCC Section A9.10.3.1 Wall #W5a)
Can you build and pour concrete in cold weather?
Yes. The forms insulate the concrete and enhance the curing process. The top of the forms, or exposed concrete areas will need to be covered, temporarily, with insulation to prevent the exposed concrete from freezing. Fox Blocks projects can be constructed any time of the year, no delays for cold weather.