SEARCH RESULTS FOR “ -32z6597*”

A stud find­er typ­i­cal­ly uses the den­si­ty of mate­ri­als to locate studs. The polypropy­lene (plas­tic) web mate­r­i­al will show up on high qual­i­ty den­si­ty stud find­ers. Note, the webs in Fox Blocks are spaced at 8″ (200 mm) on cen­ter and will be con­tin­u­ous ver­ti­cal­ly on each side of the wall.

Build­ing with Fox Blocks ICFs pro­vides you with a high per­for­mance wall sys­tem for the foun­da­tion and above grade walls. Build­ing any high per­for­mance home, with either ICFs or con­ven­tion­al wood fram­ing, has many fac­tors that define the end cap­i­tal costs.

What addi­tion­al mate­ri­als and labor are required to make a con­ven­tion­al foun­da­tion equiv­a­lent to an Fox Blocks ICF foun­da­tion which exceeds ener­gy code require­ments in most loca­tions? Con­ven­tion­al wood fram­ing requires con­sid­er­ably more mate­r­i­al, insu­la­tion and atten­tion to air seal­ing to make it qual­i­fy and per­form as a high per­for­mance wall. All of this, for con­ven­tion­al con­struc­tion, adds mate­r­i­al and labor costs to the over­all project. Fox Blocks ICFs pro­vide a sim­ple method to build high per­for­mance walls that pro­vide ongo­ing ben­e­fits from the high insu­la­tion val­ues and mass con­crete walls that are ener­gy-effi­cient and pro­vide cost sav­ings for the life cycle of the build­ing.

Com­par­ing cost per square foot between con­ven­tion­al con­struc­tion and ICFs for a high per­for­mance build­ing, is like com­par­ing apples to oranges. To devel­op con­struc­tion costs, more detailed infor­ma­tion is required, for instance the num­ber and size of open­ings, the shape and size of the home, the region­al costs for mate­r­i­al and labor, etc. If you have a project you’d like us to review and pro­vide a mate­r­i­al esti­mate, Fox Blocks would be hap­py to have one of our rep­re­sen­ta­tives con­tact you. Please com­plete and sub­mit a lead infor­ma­tion sheet on the web­site or call Cus­tomer Ser­vice.

All ICF walls below grade, that have hab­it­able space on one side (base­ment), must have a water­proof­ing / damp­proof­ing mem­brane installed. For walls that do not have hab­it­able space on one side (crawl space, frost walls, etc.) the EPS can be left exposed to the earth. The EPS will not dete­ri­o­rate when exposed to the earth.