FOX BLOCKS Products
Find the Products for Your Next Project
Fox Blocks Taper Block
Description
The Taper-Top Block typically makes up 1-2% of the ICF wall assembly on most
residential & commercial jobs. This block has six (6) strong full length
injection molded plastic ties made from Polypropylene (PP)regrind resin that
are well marked with the word "Fox Blocks" located on both sides
of the block. These ties secure the two pieces of 1.5 pcf density modified
Expanded Polystyrene (EPS) foam together that makes up each block type. The
blocks are stacked tightly together and inter-locked end to end to the
desired wall length. Taper-Top Blocks are typically used at the top of the
wall where the width of the concrete core needs to be increased to support
other adjacent lateral loads (i.e., exterior roof truss loads, interior
floor joist loads, etc.). Once a single layer or course of Taper-Top Blocks
is installed, horizontal reinforcing steel bars are inter-locked securely
together in the ties of the blocks.
| PDF |
Form Width |
Length |
Core Width |
Return |
Surface Area |
Concrete Vol |
| Document |
11.25" |
48" |
6" |
0" |
5.33 sq. ft. |
0.111 cu. yd. |
| Document |
13.25" |
48" |
8" |
0" |
5.33 sq. ft. |
0.144 cu. yd. |
Fox Blocks Accessories
Our Products