FOX BLOCKS Products
Find the Products for Your Next Project
Fox Blocks T-Block Block
Description
The T-Block (Short Leg) typically makes up 1-2% of the ICF wall assembly on
most residential & commercial jobs. This block has eight (8) strong full
length injection molded plastic ties made from Polypropylene (PP)regrind
resin that are well marked with the word "Fox Blocks" located on
all sides of the block. These ties secure the three pieces of 1.5 pcf
density modified Expanded Polystyrene (EPS) foam together that makes up each
block type. The blocks are stacked tightly together and inter-locked end to
end to the adjacent Straight Blocks. T-Blocks are typically used in
foundation walls where two walls intersect each other, an exterior wall to
an interior wall. The T-Block is engineered/designed to minimize the amount
of form bracing and eliminate blow-outs during the placement of the
concrete. Once a T-Block (Short Leg) is installed, horizontal reinforcing
steel bars are inter-locked securely together in the ties of the blocks. The
next T-Block to be installed on top of the short leg, is the long leg block
to improve construction wall strength by alternating all end block wall
connection joints during installation.
| PDF |
Form Width |
Length |
Core Width |
Return |
Surface Area |
Concrete Vol |
| Document |
11.25" |
44" |
6" |
4.375" |
4.89 sq. ft. |
0.105 cu. yd. |
| Document |
11.25" |
44" |
6" |
12.375" |
4.89 sq. ft. |
0.121 cu. yd. |
| Document |
13.25" |
44" |
8" |
4.75" |
4.89 sq. ft. |
0.141 cu. yd. |
| Document |
13.25" |
44" |
8" |
12.375" |
4.89 sq. ft. |
0.152 cu. yd. |
Fox Blocks Accessories
Our Products