FOX BLOCKS Products
Find the Products for Your Next Project
Fox Blocks Angle Block
Description
The 45 Degree Angle Block typically makes up 1-5% of the ICF wall assembly
on most residential & commercial jobs. This block has five (5) strong
full length injection molded plastic ties made from Polypropylene
(PP)regrind resin that are well marked with the word "Fox Blocks"
located on both sides of the block. The 7/32" thick x 1-1/2" wide
corner bracket was engineered to add more strength/support to the block by
reinforcing the corner once the wall is built to eliminate blow-outs during
the concrete pour. The bracket has a marketed exterior fastening surface
that is very large on both sides of the block to secure exterior veneer
finishes. The ties secure the two pieces of 1.5 pcf density modified
Expanded Polystyrene (EPS) foam together that makes up each block type. The
blocks are stacked tightly together at the corner locations and inter-locked
end to end to the Straight Blocks to the desired wall length. Once a single
layer or course of ICF blocks is installed, horizontal reinforcing steel
bars are inter-locked securely together in the ties of the blocks, then
another course of blocks are placed firmly on top as the wall is built. To
improve construction wall strength during installation, each course of
blocks should have their end-joint connections staggered in a running bond
method from the course adjacent to it.
| PDF |
Form Width |
Length |
Core Width |
Return |
Surface Area |
Concrete Vol |
| Document |
9.25" |
34" |
4" |
18" |
5.78 sq. ft. |
0.066 cu. yd. |
| Document |
11.25" |
26" |
6" |
18" |
4.89 sq. ft. |
0.082 cu. yd. |
| Document |
13.25" |
28" |
8" |
20" |
5.33 sq. ft. |
0.117 cu. yd. |
Fox Blocks Accessories
Our Products